Because I ran into all those issues, I switched gears to plans B, C, D, etc., to work around the problems I was facing. Everything worked out because I ended up with a far better metal filing cabinet makeover than what I set out to do. So, let me share the tips and tricks I discovered along the way!

This post may contain affiliate links, which means I’ll receive a small commission if you purchase through my links, at no extra cost to you. Please read the full disclosure for more information.

Best Deal

Get all my favorite digital downloads today!

Buy Now

Updated: September 24th, 2024

I also ask that you please leave your thoughts in the comment section below. I’m always trying to produce helpful content for my readers, and without knowing what you think, it’s hard to know what you find helpful/not helpful. So please leave your thoughts below!!  

Katie T’s Cottage Home Fun Fact #38

For my 38th fun fact, I want to share that I’m not a fan of pumpkin flavors. I wish I liked it more because it’s a favorite in the New England area during fall, but it’s just not my cup of tea.

Rustic Farmhouse Filing Cabinet Makeover for Your Home

So, to jump right into this rustic filing cabinet tutorial, you should understand why this cabinet makeover is so great.

The first reason is the worn look of the black metal. I anticipate that the paint on this product will chip and scratch with time.

A scratch on the flat and consistent paint would be noticeable. Because the appeal of this style is to look worn, the scratches that will come with time will only add to the charm.

The second reason is that I used vinyl floor planking on the face of the cabinet. The floor planking looks better than the contact paper vinyl. It’s also a LOT easier to install, which I will go into more depth about later in this post.

Note: if you plan on tackling a similar project, please read this entire article. Not only did I make plenty of mistakes getting the filing cabinet to look good, but there are things I would have done differently. So be sure to read all the tips and tricks carefully so you don’t face the same problems I did!

Be Methodical with Your Approach

This tip seems like a no-brainer, but when it comes to your rustic metal filing cabinet diy, it’s so true! 

My filing cabinet had recessed handles, so the whole face of the cabinet was flat except for that indentation. I decided that I could attach a plank of wood over it to give a farmhouse door look. I used wood from a leftover pallet to save money on this DIY project.

After I measured what I needed, I cut the pallet to the appropriate length. When I placed it on the face of the filing cabinet drawer, it looked terrible. I played around with it to see if I could make it look good, but the wood was too thick.

After wasting time and thinking about ways to use wood for this project, I decided to move on. I scrapped that idea and came up with what I thought was better.

Mistake #2: Vinyl Contact Paper

When I scrapped the wood pallet idea, I remembered I had some vinyl contact paper with a wooden pattern that would look great on the face of the drawers. At this point, I decided I would paint the rest of the cabinet matte black. I used this spray paint because it’s made for metal.

Originally, I was going to paint the base of the cabinet white for this rustic metal filing cabinet DIY because I am a sucker for the white look. But I decided that black would look better in this application. Especially comparing it to the original vinyl, the black just looked better.

Before you spray paint or apply anything, make sure you thoroughly clean your filing cabinet. I used dawn soap and scrubbed it down with this sponge. The green side of the sponge was perfect for scratching the original paint job. I wanted to sand the original paint so that the new paint could adhere to the metal better.

After I cleaned the cabinet, I spray-painted the base. I was not too worried about getting the coat even (as you can see from the hack job in the image). I knew I would be sanding it after, so if anything, the splotchy areas added to the worn look.

As the base of the metal filing cabinet was drying, I worked on the drawers. Because the drawers had recessed handles, I had to fill them, so the face of the drawer was flat.

Admittedly, I taped a roll of thick paper towels, and it worked. It had a slight bulge, but if you did not know it was there, you would not have been able to tell.

Next came the vinyl. I applied the vinyl to the face of the metal filing cabinet drawer. This step was the most frustrating part of the process. It would not stick, no matter how much I sanded the back side of the drawer to wrap the vinyl around. I used two different types of glue, including Loctite, but both were not working.

At this point, I decided that the glue might not be working because it needs pressure while drying. I tried clipping the area I was working on, but the clips kept sliding off because of the angle of the edges.

I finally decided to take masking tape and tape the edges.

Humorously, the tape was doing a good job adhering to the back side of the drawer. Because this area is visible only when you open the drawer, I decided to keep it.

I also added vinyl to the top of the metal filing cabinet because I liked the look of the wood. You will soon find out why I did not end up keeping it.

Top Deal

Get all digital downloads for a fraction of the price with this bundle deal!

Buy Now

Do NOT Use Vinyl Contact Paper on Your Rustic Filing Cabinet

At this point in my rustic filing cabinet makeover journey, some time passed due to the weather. I wanted to work on this project outside, and my area was experiencing some snow, so I waited until warmer weather.

Once it became nice again, I found the time to finish the project. Unfortunately, I ran into some problems. The first problem was the vinyl developed air pockets underneath. I spread them out the best I could, but it was still noticeable.

After having experienced that, I can confidently say that I would not recommend vinyl contact paper on a metal filing cabinet. The air pockets could have developed because I left it outside on my screened-in porch. So, I do not know if the cold had something to do with it, but I would hate to put all the work in with the same results.

I decided to continue with the vinyl because I was in a crunch for time and wanted to finish this project soon, so I continued to work on it.

I removed the top vinyl piece because I prefer a worn look to the vinyl filled with air pockets.

I started to prepare the area for the drawer hardware. I bought this hardware for another project and had some leftovers, so it came in handy for this application.

I attempted to drill the hole towards the center of the drawer over the recessed handle. If you do this step, be sure you have the proper bits for your drill. I have this bit kit that includes bits meant for metal. I also recommend that you go slow when drilling into the metal.

As I drilled into the face of the drawer, I noticed it was not going in. I investigated and found I was drilling directly over the thick piece of metal for the recessed handle. It was too thick to continue.

Updating Rustic Filing Cabinet the Right Way

At this point in the project, I was so discouraged. The drill left a hole in the vinyl and a dent in the metal.

Even if I wanted to redo the vinyl on the whole drawer again, I would have to wait because I did not have enough left to do the face of the drawer.

At that moment, I decided that I would need to think of something else.

Then it came to me. I bought vinyl flooring planks a while ago for a different project that never happened. I hunted down the planking in a back closet and got to work.

I decided to keep the vinyl sheets on the face of the drawers because the floor planking seemed to adhere to it better than the straight metal. With that said, if you plan on giving your filing cabinet a similar makeover, I recommend buying glue proven to adhere to metal and putting this on the whole face of the drawer. Doing so will help the planking stick to the metal.

After I placed the planking down, I got the drill out again. This time, I planned on putting the hardware closer to the top of the drawer. I managed to do this rather quickly.

Rustic Filing Cabinet Makeover for the DIY Homemaker

Just like that, my metal filing cabinet was finally finished! I hope you have some useful tips and tricks on what to do and what not to do. Let me know if you agree that doing it the way I did is the best cabinet makeover idea! Comment below or reach out if you have any questions.

Shop the Look

GooBloo Large Cotton Rope Woven Basket – 18″ x 17” Tall Decorative Storage Basket for Living Room…

Buy Now

EISUROM Moroccan 5×7 Area Rug: Soft Ultra Thin Machine Washable Farmhouse Area Rugs…

Buy Now

The post Rustic Filing Cabinet Makeover for the DIY Homemaker first appeared on Katie T's Home.

This post may contain affiliate links, which means I’ll receive a small commission if you purchase through my links, at no extra cost to you. Please read the full disclosure for more information.

Best Deal

Get all my favorite digital downloads today!

Buy Now

Updated: March 14th, 2024

I also ask that you please leave your thoughts in the comment section below. I’m always trying to produce helpful content for my readers, and without knowing what you think, it’s hard to know what you find helpful/not helpful. So please leave your thoughts below!!  

Katie T’s Farmhouse Home Fun Fact #23

Fun fact time! This is a new section I’m including on my blog posts so my readers can get to know me on a personal level!

So, for my 23rd fun fact, I want to share that one of my favorite pizza toppings is pickles!

Yes, you read that right! If you’ve never tried dill pickles on pizza (both red and white sauces are equally good but for different reasons) then you should totally try it!

The Key to Saving Money on DIY Projects

Okay, so what I’m about to tell you is the big key to saving money. It might seem like a no-brainer, but it’s super important. Without knowing how to do this the right way, you won’t save nearly as much money as you could. And don’t worry, I will go into full detail and break down how to go about implementing this hack into your everyday DIY project. 

So are you ready to know what it is? It’s simple. You have to be thrifty. 

I bet being thrifty is not what you were expecting! But let me break this down because being thrifty means so much more than just going to a thrift store.

How to Save Money

At its core, saving money means not spending it. However, when doing DIY projects, you need materials. So, you have to think outside the box with ways to acquire materials without buying them at full cost.

I see a lot of other bloggers mention thrift stores as one of the ways that they save money. That’s great, but personally, I think it can be taken a step further.

The tools required to save money on DIY or even décor projects are creativity, connections, space, and time. Below, I explain and give examples of applying these four aspects to your DIY or décor routines. 

Top Deal

Get all digital downloads for a fraction of the price with this bundle deal!

Buy Now

Creativity

Okay, so this tip might be a challenge to start with. But once you get used to actively implementing it, it becomes second nature. To do this, you have to follow two simple steps. 

First, you have to diagnose the problem. To give an example, I wanted a farmhouse-styled coffee station. I didn’t have any furniture that matched what I was envisioning. That meant I either had to buy something or make it. 

The next step to being creative is to stop looking at materials for face value.

So, to continue with my example, I had a readily available bookcase, just sitting in my closet. Instead of keeping it a bookcase, I decided to turn it into a coffee station! By going beyond the face value of the bookcase, I now have a coffee station. 

Below are some more examples of this process:

I wanted a large picture frame in the master bedroom without having to go out and buy one (problem). So, I decided to make one out of wood. Instead of buying new wood, I decided to use the wood from pallets (not looking at materials for face value).

Another example is this desk that I got for free from Facebook Marketplace. It needed some updating and TLC to match the vision I wanted for the desk. 

After using it before updating it, I decided to go without the top piece and only focus on the bottom half. Pieces were missing from the bottom half, making gaps between the cabinets (problem). 

So, I took trim from the top part and attached it to the bottom portion of the desk to fill the gaps (not looking at materials for face value).

I also had this metal filing cabinet that needed a visual upgrade (problem). I decided to spray paint the base and use vinyl flooring for the face of the drawers (not looking at materials for face value).

Lastly, this jar was in my kitchen cabinet, taking up space (problem). I already have jars that I like to use because they are more my style. Instead of tossing the jar, I turned it into a decorative vase (not looking at materials for face value).

Now you know how to diagnose a problem and solve it by not looking at materials for face value!

Connections

So, this piece is also important. Without it, you won’t be able to do much. And to elaborate, you need connections. 

It can be people you know or places like thrift stores, yard sales, or Facebook Marketplace to get materials for free or reduced cost. 

Thrift stores, yard sales, and Facebook Marketplace are pretty self-explanatory. Facebook Marketplace is good for getting furniture, like in the example given earlier. 

But what about people? Now, every situation is different because you need the “connections”. However, once people know that you are looking for supplies, they like to help out and do what they can to be able to provide those supplies.

For example, my brothers are in the trades, and I’ve gotten free scrap wood that I’ve used for my coffee station barn door, farmhouse headboard, or even pallet wood for my picture frame. 

Now, these materials tie into the second aspect of creativity. So, keep the creativity concept in mind. 

But even if you don’t have family or friends in the trades, there are ways around this. 

For example, sometimes people get rid of picture frames. Picture frames are gold in my book because they can be spray-painted easily. Even if you don’t use them for pictures, you can always make a decorative sign with them. 

Or even materials that stores may get rid of. For example, a local grocery store gets their products in bulk. They have these large pickle buckets that they get rid of.

I used to work at this grocery store, so I have an in, but other customers also asked for the buckets back when I worked for them. So, by using creativity and connections, I got free planting containers for my fig tree and vine plants! 

But like I said before, once people know that you like to do DIY projects, more often than not, they offer the supplies they come across, which ties into my next point.

Space

This might be a challenge for some, depending on your living circumstances. So, this is where you’ll have to get picky with what you take and hold onto if that’s the case. Regardless, you need space to hold onto things.

For example, my husband works with masonry supplies and, from time to time, will get free or discounted tile or stone because it was either promotional or leftover. 

Whether it’s just 10 pieces of orange tile or a pallet’s worth of stone paneling, I need to make space to hold onto them. This saves me money because it’s one less cost down the road. 

Time

All other tips considered, you need time on your side. To fully take advantage of time, you have to be good at planning. 

Planning is crucial when using time wisely because it allows you to get the materials before you need them. This also saves you space because if you can plan and know what you need to get the job done, then you can acquire the necessary materials and not have to worry about keeping everything and anything. 

So, to give an example, I plan on building my home. I have a layout and design already in mind. 

Because I’m naturally a planner, this comes as second nature. But essentially, I follow the steps listed in this blog post to save money in the future. 

I am trying to make this build budget-friendly without sacrificing style. So, for example, the master bathroom vanity could cost a pretty penny (problem). So the question becomes what can I use to create a bathroom vanity at a fraction of the cost?

Well, what about a dresser? (not looking at materials for face value). 

So, this means I need the connections on getting a dresser at a fraction of the cost, if not free. To accomplish this, I’m waiting for a dresser to appear on Facebook Marketplace with the correct dimensions and structure for a reasonable price. 

Then, once I DIY the dresser, I’ll need a space to put it until I can use it for its intended purpose. All of this would not be possible if I did not have time on my side.

So, in essence, the planning part of time is key. And if it works out, I could save a thousand or more because I had the forethought and time to do it. 

How to Save Money on DIY Projects

I hope these hacks on how to save money on DIY Projects have helped give a new perspective on being thrifty! Remember, it’s creativity, connections, space, and time! Comment below if you want to see more blog posts like this, I’d be happy to put something together!

The post How to Save Money on DIY Projects and Crafts first appeared on Katie T's Home.